DP75E Electric Drum Puller

Continuous torque rating of 177,400 in.-lbs.
Continuous line pull rating of 7,500 lbs. with 11,500 ft; of 5/8” rope on the reel
0 – 3 M.P.H. pulling speed with infinite speed control
Pulling operations are completely electronically controlled

Reel Capacity
Maximum reel diameter capacity is 72 in
Maximum reel width capacity is 54 in.
Maximum reel weight capacity is 6,000 lbs

Reel Shaft
The reel shaft is 3 1/2 inches in diameter
Equipped with a reel drive arm with 2 adjustable drive pins, a clamp type locking collar and lifting loops.
The reel shaft is mounted on replaceable full circle bronze sleeve bearings with grease fittings for smooth operation and long life.
The reel shaft is designed for quick reel change. The reel and shaft are lifted straight up with no side shift required to remove the assembly. No tools or adjustments to the electronic drive system or over spin brake are required.

Electric Reel Drive
The reel drive incorporates electrical drive that allows the operator to infinitely vary the linespeed and linepull for safe, positive control during the pulling operation
The maximum desired linepull can be preset prior to pulling so that the reel drive will stall if a restriction to the line occurs, avoiding damage to the conductor, towers, and hardware
Electronic holding brake control
The reel drive is equipped with disconnect pin which will allow the reel to freewheel independently of the electronic drive system

Control Console
A panel is positioned in the center of the trailer’s tongue for optimum operator visibility and safety. It includes:
TSE’s advanced electronic control display allows the operator to set the linepull accurately by using a toggle switch mounted atop the directional control
Electronic reel direction and speed controller includes an anti-payout stop so the operator can return the unit to neutral safely without going into payout from the pull in position
Electronic toggle switch for electric levelwind, controls the left to right movement of the levewind
Line pull is displayed in “Real Time” during the pulling operation and can be recorded at that time but download at a later time for review
Operator’s welded wire protective screen
Deluxe, padded operator’s seat with horizontal and vertical adjustments

Tandem axle set with 16,000 lbs capacity (17,600 GVWR), spring leaf type with electric brakes and a break away switch
Two break away safety chains with hooks
Four ST 215/75R17.5 tires
LED highway lighting with a dual tail light system, one for turn light and one for brake light
Reflective tape as required by NHTSA
Electric tongue and rear jacks
Electric controlled overhead levelwind for the pulling rope
3” pintle hitch adjustable to 4 height positions using pin type connections which do not require tools for adjustment
Manual holder
The trailer frame and tongue are constructed of tubular steel and fully welded
Heavy-duty checker plate fenders with mud flaps
The unit is sandblasted, primed and painted with two coats of paint